Rolex

jockego
6

• Show profile
• Show other posts

How to put a strap on a Rolex..............

I´ve had made this one for a while ago and maybe it´s helpful.

Start to find a Merto card.

Then you have to use a springbar tool and if you don´t
have that a toothpick or a paperclip will works great too.

Then just press the springbar in at one side and pull out
the endlink a little. Then push the springbar at the other
side and pull out the endlink the whole way out from the case.

Then put some masking tape at the backside of the lugs so
you don´t scratch the lugs with the springbar.

Then put one side of the springbar at the hole in the case and
the card between the springbar and the case at the other side.

[img]http://www.vikbobil.se/metro5.jpg

Then push down the springbar until it line up with the case.

Then just pull out the Metro card and let the springbar
find the hole at the case.

When you are finished, don´t forget to check so the springbar
have pop out in the hole correct.

Now the watch is ready to wear.

Good luck.

Jocke