Patek Philippe 5004 Split-Second Perpetual Calendar
Reference Guide

Patek Philippe 5004 Split-Second Perpetual Calendar

By Mark in Paris · Jul 23, 2015 · 28 replies
Mark in Paris
WPS member · Patek Philippe forum
28 replies18695 views7 photos
f ๐• in ๐Ÿ’ฌ โœ‰ ๐Ÿ”—

Mark in Paris commemorates the 20th anniversary of the Patek Philippe Ref. 5004, a highly complicated split-second chronograph with a perpetual calendar. This article highlights the watch's technical prowess, based on the Nouvelle Lemania caliber CHR 27-70 Q, and its exquisite finishing, showcasing various metal versions including the rare steel and unique titanium editions.

Gentlemen,


In 1995, Patek Philippe unveiled a new reference, the 5004. It was a very complicated piece with Split-second chronograph and Perpetual calendar functions based on the Nouvelle Lemania caliber.





This caliber CHR 27-70 Q (30 x 8.86mm) was equipped with an isolator (patented) combined to the Split-second function in order to have a lesser impact over the chronometric performance of the watch.


The finishing is trully amazing and the very "tight" construction was really hard to assemble.


The CHR 27-70 Q caliber


The watch being 36.7mm wide looked quite thick at the time. If you remember, the 3970 (Chronograph and Perpetual Calendar) was 36mm.


Here, in rose gold:

 


One of our member with the platinum and black dial version:


Credit: Nicacag66


But they were not the only versions to be produced as the watch was finally available in Steel in 50 pieces to celebrate the end of the reference 5004 and sold only at the Geneva Patek salon.


You'll find a wonderful review of the Steel version unveiled in 2011, by Oliver here: patek.watchprosite.com /



Credit: Small-luxury-world


Of course, you also may remember the 5004 Titanium unique version realized for the 2013 Only Watch auction, here below:

 


And here is a "trio" picture to admire the standard versions:





This reference has been replaced in 2012 by the 5204 reference.


Happy 20 years birthday!


Cheers, Mark



This message has been edited by Mark in Paris on 2015-07-23 15:10:40

About the IWC Ref. 5004

The Patek Philippe reference 5004 is a highly regarded grand complication, combining a split-seconds chronograph with a perpetual calendar. This reference was a significant offering in Patek Philippe's catalog, representing a sophisticated blend of technical mastery and traditional watchmaking. It was produced in limited numbers, making it a sought-after piece among collectors of complex horology.

The watch features a 36mm platinum case with a thickness of 15mm, housing the manual-winding caliber CHR 27-70 Q. This movement provides a power reserve of 60 hours and is protected by a sapphire crystal. The dial is presented in silver opaline, offering clear legibility for its numerous indications. The case is water-resistant to 30 meters.

As a split-seconds perpetual calendar, the reference 5004 appeals to collectors who value both intricate mechanical solutions and classical design. Its production run from 1996 to 2012 saw various dial and case material iterations, though platinum was a prominent offering. The integration of two major complications in a relatively compact case underscores its appeal within the realm of high-end watch collecting.

Specifications

Caliber
CHR 27-70 Q
Case
platinum
Diameter
36mm
Dial
silver opaline
Water Resist.
30m
Crystal
Sapphire crystal

Key Points from the Discussion

Advertisement
The Discussion
4J
4Js
Jul 23, 2015

and I also like the new 5204 black dial version. But in the end, the 3/9 registers really balances the watch for me. I don't care as much for the lowered registers. Just a personal preference. Best Joe

GL
GLau
Jul 23, 2015

titanium 5004 which went under the auction hammer at a whopping $3.9mn ! Cheers, Gordon

GL
GLau
Jul 23, 2015

titanium 5004 which went under the auction hammer at a whopping $3.9mn ! Cheers, Gordon

DR
dr.kol
Jul 23, 2015

Thank you for the post. Best, Kari

EL
el1125
Jul 23, 2015

for the posting on 5004. For me, my 5204 white dial is my current favorite Patek watch I own. I tried on the 5004 first several variants before deciding and the watch proportions were not for me. Much too small on MY wrist and much too tall. It's a nice watch indeed, but I felt the more modern 5204 came out so much nicer with better wrist presence, not to mention the latest and greatest movement inside.

MA
Mark in Paris
Jul 24, 2015

comparing an old reference and its replacing one but here I must say I don't know. Of course I prefer the new movement but concerning the face side, they are really both beautiful. 5204 Black dial And here it is with a 5270's movement: They really have compressed all the components for they occupy the minimum volume and it takes an eternity to buimd up (3 assemble/disassemble processes) Cheers, Mark

Advertisement

Continue the conversation

This thread is active on the Patek Philippe forum with 28 replies. Share your knowledge with fellow collectors.

Join the Discussion →