OMG! So sorry to hear this sad story dear Tony. Unbelievable indeed they would miss this is possible not fix your problem. I am floored as I would not have expected this from this brand.

Am I missing something here?

By: Anthony Perna : April 26th, 2023-22:19

I sent my watch back to Geneva, because of a clicking sound that I could hear when I would rotate my wrist. Apparently they exchanged the bridge and took care of the problem. At least that’s what they tell me. I still hear the clicking sound and when I tu...

Independents

Am I missing something here?

You aren't dreaming

I probably should halt the movement in the event the screw is floating around !!

My guess is that they never put the screw in. You would have probably already seen it affect the balance wheel or gear train by now.

This is unbelievable ! It's so obvious . It would be like a surgeon leaving his shoe in your abdomen before closing !!!!!!!!!!!!!!

So that's why the surgeon at our local hospital

Malpractice suit?

I agrée, if you feel something is incorrect

Sad to see this, sorry for the (unbelievable) trouble they put you through! I'd definitely ship it back without using it any further. They should seriously fix it now and return it to you in no time...along with some very convincing explanations! ;-)

thanks for the moral support Fab

🙏Cheers my friend and please keep us posted, hopefully next time they’ll get it right👍

Wow

Hold on! That is not a missing screw. That is a hole to remove your winding crown. - John

+1...it appears to be omitted from other Classic Origin movements. Numerous online photos will confirm this.

Agree. This is not a missing screw.

Yes, should be an access hole, designed to be exactly there for removing the crown with its stem.

You are absolutely right! I went online and look at stock photos and there is no screw in that position. I feel stupid. ￼

I am truly sorry to hear about this issue! stay strong 💪

Wow!

Read the whole thread. There's no screw missing from that hole.

D'oh!

Someone else mentioned

Ok I better head out before I screw this up any further!

Well, you are not alone

That is correct. Stock photos will confirm.

If you’re referring to the empty slot in the 9’oclock position on this picture

OMG! So sorry to hear this sad story dear Tony. Unbelievable indeed they would miss this is possible not fix your problem. I am floored as I would not have expected this from this brand.

Like my wife says....

Extremely annoying…

See this photo.

Not missing a screw

Must feel disapointing to have an engine failure so soon on your LF.

Could you post a photo with the balance wheel stationary?

Your watch needs to be flawless

Despite what others are saying, if you Google the watch, it isn't missing a screw...

This thread makes me feel like *I* must have a screw loose!

It actually looks like there should be a screw there. Kind of disappointed in the way it appears but if it’s normal, I’m happy. ￼

Most watches have a "button" or lever to press to release the stem, but most watches either hide it discretely and/or don't have display backs

Thanks Michael, I was actually going to PM you for some advice, but again, after looking at stock photos, I feel foolish ￼

The hole in question is a smaller diameter than the screws that can be seen. My vote is this isn't the problem.

LF contacted me and informed me all is well. They were very polite, courteous, and respectful. They have restored my faith in the brand. All is well. ￼

does this calibre have hacking stop to set time

How is it running Tony? Is it normal from a rate perspective now with these changes?

From what I can see all is well. I plan on keeping it on a few days to make sure. They were very gracious getting back to me from Geneva. ￼

Good to know and hope everything continues to be ok with this beauties! I also saw you were able to enjoy your DD on vacation! Cheers!

So it is fine, but

Now that the mystery of the "missing screw" appears to be solved...

Some explanations

Yep

You are absolutely right! I went online and look at stock photos and there is no screw in that position. I feel stupid.

This thread makes me feel like I must have a screw loose!

It actually looks like there should be a screw there. Kind of disappointed in the way it appears but if it’s normal, I’m happy.

Thanks Michael, I was actually going to PM you for some advice, but again, after looking at stock photos, I feel foolish

LF contacted me and informed me all is well. They were very polite, courteous, and respectful. They have restored my faith in the brand. All is well.

From what I can see all is well. I plan on keeping it on a few days to make sure. They were very gracious getting back to me from Geneva.