Rolex

I got this watch from an old friend of mine he is 78 and wanted me to have this !
He has been in possession of this from the early seventies

... from the early production of this model.

Best thing is to know its reference number and serial number. You just need to take off the bracelet from the watch head, which is fairly easy in this watch.

Then you will find the reference number between the lugs at "12" and the serial number between lugs at "6".

This will give you the exact variant of this Datejust, and with the serial number we can relate the year of making of this timepiece.

Look forward to your news about this important data!
Cheers! Abel

Thank You Subexplorer! I didn't know that! Will check it and update it on this post

No message body

I got both the sides opened and there were no visible numbers on the '6' died between the lugs but on the '12'side between the lugs the numbers 6305127 or is it 6305117 were engraved but was very faded and need a magnifying glass to read



I just realized that the watch has the lettering of Date Just in Red does that mean anything

See anything engraved there?

No,Mr.Red I haven't done this I do plan to take the watch next week to the Rolex service CENTRE here in Bangalore India and open it and take a few pictures,
will post it here once done

Your watch looks like a reference made in around 1960/61 so serial number should be around 6xx,xxx.
Regrettably numbers between lugs can be erased by the rubbing with loose end links, which looks like it happened in your friend´s watch. They are important as they can give a hint definitively.
You should try to open the screw back. You may ask this to a friendly watchmaker as it is needed an appropiate tool. Inside the lid you should find the reference number and the quarter and year of production of the watch.
Cheers! Abel
If your watch is a Reference 6305 it is a bit earlier circa 1953/1956 and serial number should be much lower than what I suggested above. Definitively best thing to do is to open the case.

No message body

Are there any markings in the blades of the clasp?

Serial numbers in the 6 million range are 1979-1980... but the dial markers and hands look older.

I think you're going to need to get it opened for a close look.

Lovely looking datejust!

I think it's an early 6305 I googled it and saw many pictures similar to the watch that was gifted to me.
I checked the clasp and the engraving on it says sterling then the Rolex symbol and the Swiss made and the numbers 4 and 34 appear

Can't quite tell from the picture... If it's an "A" it would suggest the clasp is a few years older (1976) than the case (1979) which is not unusual.

I'm pretty sure that should say, "Stainless" (as in steel) not "Sterling" (as in silver).

With big bubble back movement (so called because of its rotor needing space and hence the round caseback).

The movement needs an expert to look after and parts are hard to find. When restoring an early Explorer 6298, I bought a second movement for parts.

Enjoy the patinated beauty in the best of health!

Thanks Anatol I am in HK and it's paradise for antique watches! Will post some pictures here

Glad you have such a friend. Wish him well and reciprocate the good will.

I agree with that completely! I am truly blessed🙏🏻