F.P. Journe

Since 2015, the Young Talent Competition allows discovering the next generation of most talented young watchmaking apprentices in the world, supports them in their route to independence by identifying their achievements and putting them under the spotlight. F.P.Journe organizes the Young Talent Competition with the support of The Hour Glass, luxury watch retailer in the Asia Pacific region. Both Maisons aim to perpetuate and support the art of haute horology and cultivate the appreciation of extensive horological craftsmanship.

The selection criteria are based on technical achievement, the search for complexity in their realization, the quality of craftsmanship as well as their sense of design and aesthetics. Applicants must have independently designed and created a timepiece and/or technical construction. The 2022 Young Talent Competition winner receives a diploma and a CHF 20,000.- grant from The Hour Glass and F.P.Journe, which will allow him to purchase watchmaking tools or finance an horological project.

The jury of the Young Talent Competition 2022 is composed of key personalities from the international horological scene: Philippe Dufour, Andreas Strehler, Giulio Papi, Marc Jenni, Michael Tay, Elizabeth Doerr and François-Paul Journe.

Maciej Miśnik

Marine design pocket watch with tourbillon and pivoted detent escapement.

Age 30 - Warsaw - Poland
Self-taught - Journeyman's certificate in watchmaking - Warsaw, June 2018
Graduate in physics - Gdańsk University of Technology - September 2021

Case, hands and dial_
Marine chronometers inspired the presented pocket watch. For this reason, the case was made of brass, however, for contrast, the pendant and the bow were made of silver. Most parts were made in my own workshop without using CNC machines. Basic machines such as lathes, milling machines and hand tools were used to make the watch. For readability, steel hands were thermally oxidized to blue. In my opinion, blued hands harmonize with black indexes on the silver dial. For added complexity, the hour hand jumps once per hour rather than smoothly, as is the case with most watches.

Technical characteristics of the movement_
As in marine deck chronometers, a pivoted detent escapement was used. Oscillation frequency of the balance wheel is 2 Hz. It is well known that detent escapement has good friction properties but it is not shock resistant. Due to this, I decided to make a pocket watch instead of a wristwatch. Additionally, the watch was equipped with a tourbillon thereby reducing the problem of poising the balance. Two barrels are used to ensure sufficient torque. A major problem with watches using a tourbillon is the inertia of the cage. For this reason, the tourbillon cage components are very thin and delicate to reduce the inertia. The cage is very heavy, weighing 2 grams, but the problem of inertia was reduced. In the escape wheel, the pinion and the wheel are separated and connected via a bronze hairspring. There is a sleeve with two rubies in the wheel, which runs on the steel axle of the pinion. The hairspring is arranged in such a way that it holds the wheel on the pinion (the wheel does not fall out). As soon as the cage is stationary, the escapement wheel is released. The escapement wheel moves and the cage begins to rotate. When the escapement wheel stops on the ruby, the cage continues to move and winds up the hairspring, losing its kinetic energy, and then slightly backs up. The backing up of the cage results from its high inertia and the reaction force of the hairspring. In most tourbillon watches, the cage stops with the escapement wheel, causing a temporary high force on the escapement elements and undesirable vibrations. In the case of the presented solution, a hairspring absorbs the vibrations, similar to solutions proposed for example by Derek Pratt, Karol Roman etc. The balance wheel is equipped with a Breguet-overcoil spring. There is no regulator on the hairspring due to chronometric properties. Two screws on the balance wheel maintain regulation of the oscillation period. Other screws are used to poise the balance wheel. The tourbillon cage is also poised, by a silver counterweight. Silver was used due to its high density.

Manufacturing of the components_
The presented watch is made of raw metals. No elements have been electro painted or plated. Only the hands and three screws were thermally oxidized to blue. Sulphide was grown on silver elements, this is what gives this darker look to the dial and to the small plate with the signature. As it was written, I made most of the parts myself. Every part was finished by hand. In my workshop were not made: the watch chain, glass, 18 ruby bearings, balance hairspring, 2 mainsprings and 28 of 40 screws. I did not engrave the signature; it was made by a professional engraver.