Crownguard
65
Leave the watch alone
Hi,
Nice watch.
Never, ever, polish it or otherwise "deface" this gem, no matter who does it. The scratches and wear on the case are part of its history and give it a natural look. Polishing literally diminishes the watch and gives it a gussied-up look.
As for the crystal, it should be as low as possible, which best shows the dial. If the crystal is suitable and has some scratches these can be removed without removing the crystal from the watch with the smallest amount (head of a pin or less) of toothpaste rubbed with the thumb. Extreme care should be given to not allow the paste to touch the case. When the polishing is completed carefully remove the excess toothpaste with a damp tissue. Repeat as necessary
Bob
First let me say Hello as I am new here. Next, I seek thoughts on ths 30T2 watch
I believe it to be all original and I wanted to see if anyone can shed some light on the correct crown and crystal needed. Thanks in advance, Kurt. This message has been edited by stellarinteriors on 2009-03-30 07:25:51...
Welcome, and ...
A warm welcome to the forum! Your watch seems to be all orignal and authentic including dial and crown! It is the original crown which was used on this reference 2318 in the beginning of the 40ies! Tell us some more about this watch please. Enjoy this nic...
Thanks
Erich, Thanks for the reply. I am awaiting it's return from a frien in Illinois. As you can see inside the caseback, very few hands have touched this one. I am glad to hear that the crown is indeed original. I don't believe the crystal is and I will need ...
nice looking 30T2, the backbone of Omega for many many years
as for the crystal, it will be plexiglass without a doubt and if the one on it fits nicely then best leave it as it is. it can be polished to new condition or you can replace it. both very simple things to do, but no need to replace it if it fits. these c...
lovely watch !
The dial is still in good shape and a contemporary (bell-shaped) crown. Only the hand for the seconds (pointer / indicator) seems to be too short for this large type subdial (clipped or superseded in the past?). If you manage to find and fit a larger one,...
Seconds hand....
hmmmm, I never noticed before. Perhaps this caused the circular track inside the sub-second area (perhaps the hand was bent and a watchmaker removed the bent piece and it got turned down). Any idea how hard it would be to find a replacement and where to l...
any 'good old-fashioned ' watchmaker
should be capable to perform this satisfactorily. Ultimately you could send the watch to the mother-factory in Switzerland, but then costs would outweigh cosmetical improvement many times. Finally, have a look-out for a cheap non-working model in order to...
Hello and Welcome!
Kurt, Greetings and Welcome to the PuristSPro Omega forum! Do you collect only Omega or other brands? -MW
Eclectic collecting
I have been collecting watches for over 20 years. I currently have a few vintage and some modern pieces. My collection now totals 20 watches. Some auto's , some manual, some quartz. Here is a small sample :...
Wonderful collection
I too, enjoy the mix of old and new in my collection. I do regret having had a few watches' dials refinished, though, for most of them, it didn't result in any real diminishing of value, just learned to appreciate the patinas a little later. Here's one th...
Leave the watch alone
Hi, Nice watch. Never, ever, polish it or otherwise "deface" this gem, no matter who does it. The scratches and wear on the case are part of its history and give it a natural look. Polishing literally diminishes the watch and gives it a gussied-up look. A...
Thanks for the advice Bob.......
I use Polywatch on my acrylic crystals but toothpaste does work in a pinch(never use Gel style......very abrasive:-( ) The crystal will do for now, but I will get it replaced with a lower profiled one eventually. I also agree that a watch can only be orig...
Kurt, that Wittnauer is...
Kurt, that Wittnauer is in superb condition. something you dont come across often. i agree wholeheartedly with not having dials refinished. having a case lightly polished however, is a different matter. if it were sent for service it would be polished/sat...