ThomasM
[PuristS]
14331
My experience as well, and as a general rule, I tend to...
be willing to pay a bit more, and appreciate more highly, a Canali or Corneliani suit made in Italy or Boss made in Germany than same brand made in Turkey or Pakistan (specific locations randomly named, not necessarily specifically correct)
how much of this is regional snobbery and "image" cachet, and how much is truly substantive difference in quality and consistency?
That was my main point, mainly as a general question, with a bit of a personal conclusion.
If my life (or my friends and family's lives) depended on it, I would go for the Oberndorf HK without question, if I had a choice.
Thanks for giving additional data points to the general issue.
Cheers,
TM
"specs" and tolerances - what are your experiences?
examples of differences between supposedly "same" specs and tolerances - HK original German rifles vs "licensed" versions (Greek, Pakistan, Mexico, etc) - pins can be pressed in, vs "tapped" in, on Oberndorf and HK in house production vs licensed... Shoei...
Specs...
Components can be 'built-to-print', can they really replicate an original? I'm not so sure, but it's even more difficult to assess a system by looking at a single component - witness the discussion of Brembo brakes in another thread. Yes, opposed piston c...
you've raised some very interesting and salient points, BDLJ.
Hi, Ben, I personally feel there are no universal "truths" (and find it offensive when some try to make statements as if there were, like "cheap Chinese knockoffs" or "prison slave labour" (in China, Mexico, TurkUzKazhakstan, etc) - as if all products fro...
All good points, TM.
Going back to the 'original point' concerning production tolerances.... A good way to think of it: Take a tolerance of 100mm +/-0.5. This tells you that it can be 99.5mm to 100.5mm. But you probably need some experience and study to know what exact length...
In general the specs are off
Interesting topic TM and would like to know more about what recent experiences have brought this up. The HK example would be a really good reason for the argument of specs/tolerences being off compared to the licensed versions (Greek for SAR8, Pakistan fo...
My experience as well, and as a general rule, I tend to...
be willing to pay a bit more, and appreciate more highly, a Canali or Corneliani suit made in Italy or Boss made in Germany than same brand made in Turkey or Pakistan (specific locations randomly named, not necessarily specifically correct) how much of th...
Sales brochures ...
Thomas, this thread could be endless ... so i will try to tell only what sticks to my mind best ... . Sales brochures of modern sports bikes that is. I started riding in the early 90ies, and in 1993 i bought a Honda CBR 600 f2 imported from the US to Euro...
Dry weight.
Good post, Bim. The Japanese like using dry weight, which is not the test weight for the bikes but a completely dry weight - no coolant, no acid in the battery, no oil in the sump, no brake fluid, etc. Nice way for a bike to run The funniest thing with th...
Thanks, Bim, Ben, Ed. At the risk of getting too abstract and philosophical...
this is an automotive forum afterall, and not Belles Lettres... (aside - I've found that, in general, car, and even more so, motorcycle, guys, tend to be pragmatists, at least in terms of priorities with MEASURABLE benefits like performance figures and re...
I have nothing but
...admiration for Japanese performance motorcycle engineering. My favourite bike, the one I will never sell, is Japanese. The points of criticism of above are directed at my usual bugbear: Advertising/Marketing drivel. Drivel that does them a disservice a...
Point well made, and well taken.
Hi, BDLJ, "The points of criticism of above are directed at my usual bugbear: Advertising/Marketing drivel. Drivel that does them a disservice as it allows for the reasonable criticisms Bim makes: Claims made, Claim not met, Disillusionment results. " Com...
Specs.
Late to comment but have read thread in its entirety. IMHO, tolerances achieved by robots are so close in modern manfacturing that BMW's from Germany, South Africa or Spartanburg would be near identical in tolerances. I no longer hear or read about bluepr...
Blueprinting.
You're completely correct re Blueprinting and modern specs. That whole exercise of getting conrods and pistons weight matched is now done pretty well by the factory. There a no longer wierd bits of casting to get your grinder on, nor badly mismatched port...
Thank You for chiming in .....
and offering your thoughts. I suspect it is cost cutting on Subaru Australia 's part, regarding only 2 pot callipers for Oz. Maybe Subaru Australia need to recoup the costs of complying with ADR ( Australian Design Rules ) given the small numbers imported...
A fun story about speedo calibration.
Hey Thomas, your comment on the speedo calibrations reminded me of a fun story. When i had my Audi A3, me and a friend owning the Subaru-dealership organized a small drive on some country roads. So one evening we went out to make a road-book, we decided t...
Speedo error...
....Speedometer errors are definitely vehicle dependent, while the error is always postive (speedo cannot under-read), brand new tyres running at decent temperature (and hence above cold pressure) will compensate somewhat for the error. If the manufacture...
Oh, before I forget to pass this information on...
for Victoria, Australia. A driver successfully challenged and had his speeding fine and demerit points overturned in court because he was caught speeding over 104 K ( you are allowed a 4 % , but previously 10 % ) but less than 110 K in a 100 K zone. He wa...
Hmm. Haven't heard of that one...
....seems a strange defence. I think Kearon v. Grant still stands(???) So even if you reasonably made the mistake of speeding....it's still your problem. So it's not much different than if you tried to get out of a drink driving case by pointing to your f...
Wheelspin ....
I remember doing 195 kph from a standstill in under 10 seconds .... while standing still .... in the snow Bim
A Bit of Blether from an Old Socialist.
The major influence on quality is the owner of the manufacturer. The more firms are owned by hedge funds, pension groups etc. the more quality will suffer. The reason manufacture is transferred to Asia and South America is cheap, non-union labour, and the...
A common point of view and one that seems to make intuitive sense, but...
like in most things, especially in the area of generalizations, not necessarily a truism. Many management gurus have already pointed out the dangers of short sighted profit maximization at the expense of "quality" (which of course needs to be defined, and...
The Wealth of Nations versus Das Kapital in no more than fifty words.
The vast majority of companies are owned by their shareholders. The major shareholders are financial institutions. The companies and financial institutions are run by employees who must comply with their business plans. In the case of the companies the bu...
I love simple declarative statements like
"The concept of a sound business plan is false. " Makes life and the world so much simpler, eh? Alas, "real life" has a tendency to force me to face the reality that things are not quite so simple, both in concept (like "a contented labour force" and "ben...
You Can't Jump to Conclusions.
Isn't it remarkable how one can gain the wrong impression? If I didn't know better I would swear you don't have a clue what you're talking about and are trying to hide your ignorance behind a smoke screen of nebulous pontification regarding the nobility o...
Clever, your not so subtle use of irony to make this exchange "personal"
Dear Stephenleslie, I had no intention with my comments to make this a personal issue (as in, "you are stupid because"...or "you are an ass because"...) and my comments were sincere, as were my questions. My request to define "a contented labour force" wa...
Marketing and brand perception is powerful...
One pays for a popular brand accordingly. I do think that great values exist than more than satisfy the price differences. I prefer to shop that way provided I can get objective comparison. I don't work in an environment that requires brand cachet, but ot...
Well said Snak !!
I experienced this in real-time ... a client of me telling me the company i worked for some ten years ago has a great brand-name and is highly respected ... i sell better stuff at a better price with better after sales care ... but who am i with my one-ma...